Horn Loaded Mid Top Speaker Plans

Horn Loaded Mid Top Speaker Plans – My box idea has 2×12 in an xtroish bandpass horn configuration but straighter, hits 100hz as stated. I am pretty new to all this, but the only folded horn designs i have seen for tops are the bill fitzmaurice dr series. We have determined that the size of the horn is in direct correlation with the frequencies we want to play. The original 10”mid driver was a beyma 10mi100 / 10mi250.

I want to design a mid high section thats small ish horn loaded and arrayable. If you would cross the smt212 somewhere between 100 and 200 hz, the 12p80nd would have it's benefits. Overall box would be a little smaller than an xtro. If you were to build a horn loaded system you could use two 18” scoops per side and one 2 x 12” horn with a 2“ compression driver on top, or better still you could make some of.

Horn Loaded Mid Top Speaker Plans

I am replacing my four 18 inch dayton pa460 subs with eight 15 inch pa385 subs. 1375 post options post reply quote tocooltom report post thanks (0) quote reply topic: Enclosure type:horn size:800x500x770mm recommended driver:

I’d really love to make a simple box design speaker 10′ with a horn speaker on the top, mounted externally. So it can be used 2 aside for small venues and then maybe a 2×3 array for. #1 i am starting to work on a new pa system.

I think making a 3 way horn loaded (or four way) diy top is an extremely hard thing to get right and it will ultimately cost a fortune in drivers/amps/processing and. This is our way of supporting the hobby and allowing enthusiasts to enjoy the. Currently my tops are front baffle loaded and sealed boxes, but would like to experiment with a horn loaded 1×12 with a coaxial mounted 2.

I have found a set of. I’ve bought almost all the speakers and horns. Below you will find all of our diy plans and cad files available for download.

Simple Midtop SMT212